Orange Light On Ethernet Port? Here's 7 Possible Fixes (2023)

Most users adopt ethernet to access the internet as it’s more reliable and faster than WiFi. While doing so, you might have noticed an LED light blinking or flashing on the ethernet port.

Interestingly, there’s not just one type of color that lights up; you may have seen multiple colors – yellow, green, blue, red, and sometimes even orange! Indeed, you might have wondered what the orange color is all about and whether this is a worrying sign.

Here, we will discuss everything about the orange light on the ethernet port. Also, we will guide you on how to fix this when it’s flashing or blinking haphazardly.

Table of Contents

What Does Orange Light on Ethernet Port Indicate?

Orange Light On Ethernet Port? Here's 7 Possible Fixes (1)

The orange light on your ethernet port can indicate different things. This is because there’s no standard specifying a certain meaning.

(Video) How to Fix Red Cross on Network Icon Windows 10, 8, 8.1, 7

Surprisingly, the orange color can light up when your internet connection is slow or blinks continuously when it’s not working. However, this may also indicate that you have a stable connection. Basically, the lights on the ethernet ports totally depend on the router model, laptop, CPU, or console.

Well, modern ethernet ports come with two different LEDs – one that determines the connection speed and the other indicating connection status. These are aligned at the two ends of the port; it can be left and right or top and bottom.

Among the two, one LED constantly shows one color, generally green, indicating whether your device is connected to the network. On the other hand, the other LED blinks continuously, generally amber, indicating there’s no issue with the exchange of information.

If you see a green light flashing or blinking, it usually means you have a stable connection with a high-speed flow of information (at around 1000 Mbps). Likewise, if your internet speed isn’t good and the flow of information is below 100 Mbps, you may see an orange light in the ethernet port.

However, this can be different on different devices. So, we suggest reading the user manual to know what each light indicates for you.

Why is Ethernet Port Blinking or Flashing Orange Light?

Indeed, it’s frustrating when the orange light on the ethernet port flashes continuously. This can be due to both connection and internet speed issues.

Here are some of the major reasons why the ethernet port keeps blinking orange light:

(Video) Ninja Kidz Movie | Season 1 Remastered

  • Your ISP has blocked your internet access
  • Type of ethernet cable
  • Slow internet connection
  • Fiber or ethernet cable is broken
  • The ethernet port on a wall is not working
  • The router or modem connection is loose
  • Problems with the Network Interface Card
  • Outdated router firmware

How Can I Fix Orange Light on Ethernet Port?

If your ethernet port is flashing orange light and you’re also facing internet issues, you need to ensure plenty of things to fix it.

However, if you desire to get rid of the orange light, that’s not possible. These lights are crucial for technicians and even normal people like us to monitor network connectivity issues.

Sometimes, orange light doesn’t mean your internet connection isn’t working at all. Instead, it may only indicate slow connectivity. So, you definitely do not want to stay idle if you’re not getting what you paid for.

In this section, we have included the seven possible ways to fix the ethernet orange light for faster internet connectivity.

Use Proper Cables

Orange Light On Ethernet Port? Here's 7 Possible Fixes (2)

The prime reason for the orange light problem is the type of cable you’re using. Basically, there are three different cables available for ethernet – coaxial, twisted pair, and fiber-optic.

If you’re using a coaxial cable, it can transmit signals from 10 to 100 Mbps. With the presence of a single copper wire and thickly covered insulation material, they are less susceptible to physical damage. Moreover, they are more expensive but can be used over long distances.

On the other hand, twisted pair cables are categorized into two types – Shielded Twisted Pair (STP) and Unshielded Twisted Pair (UTP). While these cables can transmit signals over 1000 Mbps, they are easily breakable and can be used only up to 100 meters.

Well, the twisted pair cables used for ethernet are classified into various categories: CAT 4, CAT 5, CAT 6, and so on. The numbers beside CAT represent the performance level in increasing order. So, if you have a CAT 4 or 5, we recommend replacing it with a higher version (5E or 6).

(Video) Fix windows 7 no internet access but connected ethernet

Lastly, optical fibers are probably the best cables you can use. They work based on light and total internal reflection. Thus, they offer better bandwidth and improved latency than prior cables. Although they can be used up to 80 km, they are expensive and might not fit into everyone’s budget.

Make Ethernet Connection Secure

Orange Light On Ethernet Port? Here's 7 Possible Fixes (3)

Another reason could be a poor ethernet connection. Thus, we recommend monitoring proper connectivity between your router and modem.

Moreover, there may be cable issues between the router and your PC’s ethernet port. Hence, you need to secure the connection there as well. Also, your ethernet cord may not work, so we recommend checking and fixing it if it’s broken.

To ensure a valid link between all your networking devices, we suggest power cycling both modem and router. All you have to do is unplug their cables. Then, wait for two to three minutes before inserting them back, making sure that the connection is tight.

Furthermore, cleaning the ethernet ports is also essential. This ensures that dust or carbon stuck inside may not loosen the connection.

Try Cloning Mac Address

Cloning your Mac address can significantly help improve networking issues. Generally, some ISPs limit the use of hardware to access the internet. This is why you might face orange light issues on your ethernet ports.

However, when you do the cloning, our router is assigned a new MAC address, and your ISP will finally recognize it. This way, you can start using the internet as before. Here’s a simple process on how to clone a Mac address using the router’s configuration page:

  1. Firstly, ensure that your ethernet is connected to the PC.
  2. Now, open a web browser and navigate to the router’s configuration page.
  3. Use your login ID and password to sign in.
  4. Then, you may find the MAC Clone option inside the Network tab or Status tab. Since every router configuration is different, you may need to locate one yourself or refer to the internet to find the exact location.
  5. In the MAC Clone window, find the Clone MAC address option and select it.
  6. Finally, click on Save and see if this has resolved your ethernet orange light problem.
    Orange Light On Ethernet Port? Here's 7 Possible Fixes (4)

Update Router Firmware

Most of us forget that updating the router’s firmware is quite important. With outdated firmware, our network is open to security threats. This might slow down our internet, or in the worst case, the connection is lost.

(Video) Optimizing Sleep | Devin Burke | Better Sleep for Better Health

So, updating the firmware will repair anything that’s creating internet issues. Also, this may fix the orange light issue on the ethernet port.

Well, every router has its own configuration. So, before starting the process, we advise going through the user manual first. Here’s how you can generally do it on most routers:

  1. Open any web browser and go to the router’s configuration site.
  2. Log in using your username and password.
  3. Once you’re signed in, find the Update Software options. This might be different in your case. Generally, this is available in the Advanced tab.
  4. Under Firmware Version, click on the Check option to examine if there’s an update available.
    Orange Light On Ethernet Port? Here's 7 Possible Fixes (5)
  5. Now, you may get the Firmware Upgrade button. Tap on it and wait until your router’s latest firmware is updated.
    Orange Light On Ethernet Port? Here's 7 Possible Fixes (6)
  6. Finally, restart your router, which should fix the orange light on your ethernet port.

Perform Factory Reset on Router

Performing a factory reset on your router will take all the settings back to their default. So, anything causing issues with your ethernet should resolve, and you should no longer see the continuous flashing orange light. Follow the below steps one by one to factory reset your router:

  1. Unplug the ethernet cables from all your device’s ports.
  2. Find a hole where your reset button is located.
    Orange Light On Ethernet Port? Here's 7 Possible Fixes (7)
  3. Take a pointed object, like a pen, and press the button for at least a minute.
  4. Once the reset is complete, you may notice all the lights on your router flash. Then, the router restarts itself.
  5. Now, plug in an ethernet cable on your PC and open your web browser.
  6. Navigate to the router’s configuration page and set up your router from scratch.
  7. Once the internet is back, check if the orange light is still blinking on the ethernet port.

Replace Network Interface Card

Orange Light On Ethernet Port? Here's 7 Possible Fixes (8)

The Network Interface Card is responsible for the necessary connection to enable a computer to access the internet. Basically, these expansion cards take care of both the ethernet and WiFi.

So, if you notice continuous orange light flashing on the ethernet port with no internet access, this might mean that your NIC is going bad. Hence, the possible solution is to replace it.

Before moving ahead, we suggest checking whether the NIC is working properly or not. Follow the below guide on how to do so:

  1. Search for Command Prompt in the Start Menu and run it as administrator.
  2. Next, copy and paste the below command:
  3. Now, hit enter, and your NIC is probably malfunctioning if you notice an error.
    Orange Light On Ethernet Port? Here's 7 Possible Fixes (9)

However, we recommend reinserting the NIC first. If that doesn’t solve your problem, here’s what you can do:

  1. Shut down your PC completely.
  2. Then, start removing all the cables from the CPU.
  3. Remove the cover plate. In older CPUs, you might need a screwdriver to do so.
  4. Now, locate the NIC and carefully remove it from its slot.
  5. Next, properly insert the new NIC in the same slot.
  6. Close the cover plate and plug in everything, including the ethernet cable.
  7. Power on your PC and check if the ethernet port’s orange light is now fixed.

Contact Your Internet Service Provider

If neither of the above-mentioned fixes worked, the last option is to call your ISP and confess the issue. Also, tell them that you have replaced the NIC card.

(Video) How To Make Local Area Connection in Windows 7 ( LAN ) Hindi / Urdu

Well, some providers may come to your service immediately and fix anything causing the orange light problem. So, it’s better if you let them handle these situations if nothing works from your side.

Moreover, we recommend learning what they did to fix the problem. This way, you can resolve it the next time you face the issue again.


What does an orange light on an Ethernet port mean? ›

Depending on the networking hardware you use, the orange light indicates a lower networking speed than the network equipment is capable of. With other (and usually older) networking equipment, a blinking orange led indicates that there are conflicts when sending and receiving network packets.

How do I fix orange light on Ethernet spectrum? ›

If the Spectrum modem lights orange, in this case, it means restricted connection or availability of only one channel. Check with the internet service provider. Also, if you have a capped or metered connection, check if you have exceeded the data cap.

How do I fix orange internet light on router? ›

If you have a router, wireless router or other network device, then power cycle the device(s) by unplugging the power. Wait a minimum of 90 seconds and plug the device back in. NOTE: If the router or other network device is plugged into a power strip, power cycle the router/device itself not the power strip.

What does orange light mean? ›

Red, Yellow/Orange, Green, and Blue Lights

A red warning light demands immediate attention (don't drive any further), while yellow/orange warning lights indicate a problem that needs to be serviced soon. If you see a green or blue light, this normally indicates that a certain car function is on or currently in use.

How do I fix my Ethernet port? ›

How to Fix a Faulty Ethernet Connection in Windows 10
  1. Check the Ethernet Cable and Port. ...
  2. Run Network Troubleshooter. ...
  3. Update the Ethernet Adapter's Driver. ...
  4. Use Windows 10's Network Reset Tool. ...
  5. Disable Your VPN. ...
  6. Check Power Management Settings. ...
  7. Check Your Fixed IP Settings. ...
  8. Check LAN Proxy Settings.
14 Jul 2021

Why is my Ethernet port orange and not green? ›

Because the person who installed it (or ordered its installation) specified that it be orange. Green actually isn't very common for premises wiring of Ethernet ports. Most commonly blue is used, because there is a de facto standard of using blue cabling and jacks to designate local network Ethernet wiring.

How do I know if my Ethernet cable is faulty? ›

To troubleshoot, visually scan the length of the cable and look for sharp bends, kinks, or other physical faults in the cable. If you find a sharp bend or kink in the cable, straighten the cable and check if the problem is solved.

How do I reset my Ethernet adapter? ›

Select the Start button, then enter settings. Select Settings > Network & internet > Advanced network settings > Network reset.

What color should the Ethernet light be? ›

LED patterns
LED nameLED colorStatus of hardware
Ethernet Speed (green)No lightPort speed is 10 Mbps.
Steady greenPort speed is 100 or 1000 Mbps.
Ethernet Activity/Link (green)No lightThere is no link.
Steady greenThere is a link.
15 more rows

What causes orange light? ›

A solid or blinking orange light indicates the monitor or other display is not receiving a signal. For example, if your monitor has power but is not plugged into the computer, the indicator LED is orange. A monitor's orange light may appear next to or on the monitor power button.

What does orange LED light mean? ›

An orange LED indicates that your Motion is charging.

What is the effect of orange light? ›

A team of European scientists has shown that exposure to an orange light improves alertness and cognitive brain function. Light, both natural and artificial, affects our circadian rhythms, causing alertness and sometimes upsetting our sleep patterns.

How much does it cost to fix Ethernet port? ›

The cost of installing an Ethernet port is about $150. This price primarily consists of labor, which requires one to two hours at around $40 to $100 per hour. The port itself costs between $25 and $50.

How do I know if my Ethernet port is active? ›

Go to the back of your computer. Look for a solid orange or green light next to the blue network cable. It will be lit if the network port is active.

What causes Ethernet to stop working? ›

It can be a problematic wire, loose connection, network card, outdated driver, and whatnot. The problem can be caused by both a hardware issue and a software issue. So, we will have to go through multiple methods covering both the software and hardware issues that might be causing the Ethernet problems.

How do I test my Ethernet connection? ›

  1. From the start menu, go to the “Run” option. Type “cmd” in the text box and then click “Okay”.
  2. In the window that pops up, type “ipconfig /all” and hit Enter.
  3. In the information that results, look for “Physical Address….:”. It will be listed under “Ethernet adapter Local Area Connection”.

How do you clean an Ethernet port? ›

If corrosion is caught early a simple cotton swab and ~91% Isopropyl Alcohol (rubbing alcohol) may be enough to clean the connector of corrosion. In some slightly more advanced situations more connector robust contact cleaning solutions may be used.

How do I fix my network connection? ›

Restart your device.

Open your Settings app and tap Network & internet or Connections. Depending on your device, these options may be different. Turn Wi-Fi off and mobile data on, and check if there's a difference. If not, turn mobile data off and Wi-Fi on and check again.

How do I manually reset my network adapter? ›

Windows 10 - Performing a Network Reset
  1. From the Start Menu, navigate to Settings.
  2. Click Network & Internet.
  3. You should be in the status tab by default. ...
  4. Click Reset now.
  5. Click Yes to confirm and restart your computer.
  6. Your computer will now restart and your network adapters and configuration will be reset.
20 Feb 2017

What are the 2 lights on an Ethernet port? ›

Most Ethernet ports will have two LED's, one on the left side and one on the right side. One will indicate connection state (Solid) and the other connection activity (Flashing).

What Ethernet colors mean? ›

Grey-colored cables typically represent standard ethernet connections, while green cables represent crossover ethernet connections. Yellow cables are used to signify POE (power over ethernet), while blue cables are used for terminal server connections.

What is orange and green light in Ethernet? ›

On the Ethernet port: When the green LED is on, there is 10/100/100Mbps traffic When the orange LED is on, the port is being connected, but no data is being transferred When the orange LED is blinking, data is being transferred When the orange LED is off, no data is being transferred.

What do different Ethernet port colors mean? ›

Grey – used for standard ethernet connections. Green – used for crossover ethernet connections. Yellow – used for POE connections. Orange – used for analog non-ethernet connections.

Why is my lan1 light orange? ›

Orange & flashing - Connection in use. These lights should be off, unless there is a connection detected. Off - No telephone connection detected. This could be as phone is not in use or the line doesn't have a phone connection provisioned.

What do the colors on Ethernet mean? ›

Grey-colored cables typically represent standard ethernet connections, while green cables represent crossover ethernet connections. Yellow cables are used to signify POE (power over ethernet), while blue cables are used for terminal server connections.

How do I know if my Ethernet port is broken? ›

Follow the Ethernet cable from your computer to the device where it terminates -- such as a hub, router or switch -- and check the status lights on the device. A solid green light usually means a good connection, while a flashing green light, or amber light, indicates that there's a problem.

How do I check if my Ethernet port is working? ›

Open Settings > Network & Internet > Status. Check your Ethernet connection status there. It should display You're connected to the Internet underneath the Ethernet network connection. If one Ethernet cable doesn't work and you have another one nearby, try the other Ethernet cable to see if that works.

What are the two lights on an Ethernet port? ›

Most Ethernet ports will have two LED's, one on the left side and one on the right side. One will indicate connection state (Solid) and the other connection activity (Flashing).

What color should my Ethernet cable light be? ›

Amber on – Operating as a Gigabit connection (1000 Mbps). Green on – Operating as a 100-Mbps connection. Off – Operating as a 10-Mbps connection.

Why is my Ethernet connected but not working? ›

Check if there are damaged ethernet ports or any hardware

Then, unplug and replug the cable back into the port to see if that solves the problem. If that didn't work, try plugging the cable into another port to see if that makes a difference.

Does Ethernet color code matter? ›

The answer is no. It does not matter what color my ethernet cable is. The color of the cable does not have any performance characteristics that would make you want to choose a certain color over the other. Some of the cables where you have limited options are is in outdoor cable.

Is the Ethernet light supposed to blink? ›

The blinking light on your Ethernet connector when your computer is turned off means that the computer is still connected to the network. This is used for Wake-on-LAN (if you computer is pinged by some other computer, it wakes up). This can be disabled in the BIOS.


1. How to set up your ATT DSL Broadband Modem Router Internet WiFi Gateway
(Tom Leeman)
2. This serious issue was a simple fix... Here's how!
3. Fix the Dell Orange Light of Death
(Blue Kap)
4. Is my phone listening to me? We tested it, here's what happened
5. King Von - Armed & Dangerous (Official Video)
(King Von)
6. How to get Faster Internet speed when you change a simple setting
(Liron Segev)
Top Articles
Latest Posts
Article information

Author: Ray Christiansen

Last Updated: 01/17/2023

Views: 5323

Rating: 4.9 / 5 (49 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Ray Christiansen

Birthday: 1998-05-04

Address: Apt. 814 34339 Sauer Islands, Hirtheville, GA 02446-8771

Phone: +337636892828

Job: Lead Hospitality Designer

Hobby: Urban exploration, Tai chi, Lockpicking, Fashion, Gunsmithing, Pottery, Geocaching

Introduction: My name is Ray Christiansen, I am a fair, good, cute, gentle, vast, glamorous, excited person who loves writing and wants to share my knowledge and understanding with you.